Installation Instructions

🛠️ Required Tools

  • 🔧 Phillips Screwdriver

  • 🔩 5/16” and 7/32” Drill Bits

  • 🔒 Loctite or 3M Red 271 Thread Locker

Mounting Options

  • Wall Mount: 🧱 Install at least 24 inches away from other devices. Drill a 0.25” hole, insert the provided wall anchor, and secure the antenna with screws.

  • Window Mount: 🪟 Use the suction cup to attach the antenna to a window. Ensure a clear line of sight to the nearest cell tower for optimal performance.

  • Table Mount: 🖥️ Place the antenna upright on a stable surface, ensuring it is at least 24 inches away from other devices.


Installation Guidelines

  1. Antenna Placement: 🚫 Avoid interference by selecting a location far from electrical devices, metallic surfaces, or obstacles like tinted glass.

  2. Cable Routing: 📐 Ensure cables are not sharply bent and are secured at least 6 inches below the antenna. Use electrical tape or UV-resistant cable ties.

  3. Cable Connection: 🔌 Connect the antenna cables to the router as indicated (CELL 1 to MAIN0, CELL 2 to AUX0/DIV).


🔍 Commissioning & Testing

  • Check that cables are secure and not bent sharply.

  • 📶 Verify signal strength using a cellular device, ensuring RSSI is higher than -75dB.

  • Maintain at least 20 cm distance from the antenna for RF compliance.