Nomad Raptor Setup Guide
π¦ Nomad Raptor Setup Instructions π¦
The Nomad Raptor modem is pre-configured; all you need to do when you receive it is activate it!π
Please visit this link here for more information on how to activate your Nomad Internet Modem!
β―οΈ How Do I Activate My Modem? β
OR
How do I activate my device once I receive it?
Step 1:
Take your Nomad Raptor out of the box and plug your power cord into the βpower portβ on the back of the Raptor. Now, plug into the wall! π
Step 2:
Wait 30 minutes while your Nomad Raptor locks onto the best tower in your area. During this time, the LED indicator will blink white. Once the Raptor has locked on to the closest tower, the LED will be either green or blue. π‘
(Note: Ensure your modem is free of obstructions and place it in or near a window for optimal connection. Do not place it in a cabinet or basement.) πͺ
Step 3:
Once the LED is green or blue, locate the Primary Wi-Fi password at the bottom of the Raptor to connect all of your devices! π
Important: The SIM card is preinstalled in the modem. Please do not remove the SIM unless asked by the tech support team. π«